Hot-dip galvanised 7-year guarantee
HB14G
Heavy Barred Gate 4.27m
Gates — built to our standard spec and hot-dip galvanised after welding, for Mid Canterbury and the rest of the country.
$376.80+ GST
Prices are subject to change. A quote locks yours in, with freight.
Full specification
- Product description
- New Zealand Fencing Solutions Medium Barred Gate.Check out the full specs below.
- Gate - frame
- 32mm OD pipe thickness 2mm
- Gate - internal uprights
- 5 x 32/6mm flat steel which are twisted at 90 degrees at the top and bottom and fully welded onto the gate frame
- Gate - internal horizontals
- 5 x 25mm OD pipe thickness 2mm. These go through holes drilled in the flat uprights and are then welded for extra strength
- Gate - hinge lugs
- 2 x heavy duty hinge lugs fully welded to frame
- Gate - gate latch hook
- This is welded on the inside of the frame. Simply insert the gate chain and close the hook, no wire is required.
- Gate - height
- 1m total including the frame
- Gate - length
- 4.27m frame length with the hinge lugs extending out another 45mm. This is an overall length of 4.31m
- Gate - galvanized spec
- Hot dipped galvanized after welding to a minimum of 500 grams m/2
- Gate - weight
- 51.4kg