Hot-dip galvanised 7-year guarantee
UHB12G
Ultra Heavy Barred Gate 3.69m
Gates — built to our standard spec and hot-dip galvanised after welding, for Mid Canterbury and the rest of the country.
$550+ GST
Prices are subject to change. A quote locks yours in, with freight.
Full specification
- Gate - frame
- 42mm OD, pipe thickness 2.5mm
- Gate - internal uprights
- 2 x 40mm/6mm flat steel.
- Gate - internal horizontals
- 5 times 32mm OD, pipe thickness 2.5mm. These are full length; they go through holes drilled in the flat uprights.
- Gate - hinge lugs
- 2 heavy 50mm by 5mm hinge lugs are fully welded to the frame 700mm apart
- Gate - gate latch hook
- this is welded on the inside of the frame. Simply insert the gate chain and close the hook, no wire is required. It is 300mm below the top of the gate
- Gate - height
- 1.05m total including frame
- Gate - length
- 3.65m frame length with hinge lugs extending out another 45mm. This is an overall length of 3.69m.
- Gate - galvanized spec
- The entire gate is hot dipped galvanized after welding to a minimum of 500grams m/2